| CLAREX® AR (Anti
Reflection) COAT FILTER |
|
CLAREX® AR COAT FILTER is treated with a
multi-layer AR coating which prevents light reflection. Additional
coatings prevent surface scratching and smudging.
CLAREX® AR COAT FILTER may be combined with non-glare surfaces to further
reduce reflection.
|
Click here for
transmission and reflectance charts
|
|
FEATURES:
|
| • |
Excellent reflection prevention. |
• |
Excellent transmission. |
| • |
Excellent optical characteristics. |
• |
Excellent surface hardness. |
| • |
Excellent impact resistance. |
• |
Excellent smudge resistance. |
Available in any color. (see standard
colors)
|
|
AVAILABLE
SIZES: |
|
0.8mm, 1.0mm. 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm and
5.0mm
(Please contact us if your require another thickness) |
|
|
310 x 380mm (Effective size is 290 x 360mm)
|
|
|
APPLICATIONS:
|
|
Anti-Reflection Panel for LCD, CRT, LET, EL,
PDP, VFD,
FED, Bar Code Scanners, etc. |
|
|
CONSTRUCTION:
|
|
Smooth surface, AR2, hard-coat 2, shown as RH20, MH21
flat.
Non-glare one surface, AR2, hard-coat 2, shown as RH20 MH21 No. 1.
All AR coatings and non-glare surfaces available 1 side or both sides.
(Refer to "Optical Properties" chart below). |
|
|
|
OPTICAL
PROPERTIES:
|
| Product No. |
Color Tone |
Transmission |
Reflection |
| RH20 MH21 Flat 001 |
Clear |
98% |
under 0.5% at 550nm |
| RH20 MH21 Flat N-2902 |
Gray Smoke |
80% |
under 0.5% at 550nm |
| RH20 MH21 Flat N-298 |
Gray Smoke |
70% |
under 0.5% at 550nm |
| RH20 MH21 Flat N-119 |
Gray Smoke |
63% |
under 0.5% at 550nm |
| RH20 MH21 Flat N-157 |
Gray Smoke |
50% |
under 0.5% at 550nm |
| RH20 MH21 Flat N-159 |
Gray Smoke |
41% |
under 0.5% at 550nm |
| RH20 MH21 Flat N-217 |
Gray Smoke |
31% |
under 0.5% at 550nm |
| RH20 MH21 Flat N-127 |
Gray Smoke |
23% |
under 0.5% at 550nm |
| RH20 MH21 Flat N-205 |
Red |
17% |
under 0.5% at 550nm |
| RH20 MH21 No.1 001 |
Clear |
97% |
under 0.5% at 550nm |
|
|
|
PHYSICAL
PROPERTIES:
|
| PROPERTIES |
METHOD |
UNIT |
VALUE |
| Specific Gravity |
ASTM D-792 |
|
1.19 |
| Elongation |
ASTM D-638 |
% |
5 |
| Flexural Rupture Strength |
ASTM D-790 |
kg/cm2 |
800 |
| Heat Distortion Temperature |
ASTM D-648 |
ºC |
110 |
| Maximum Recommended
Continuous Temperature |
ºC |
80 |
| Coefficient of Thermal Expansion |
ASTM D-696 |
cm/cm/ºC |
7 x 10 –5 |
| Heat Resistance |
80ºC x 100hr |
|
No Change |
| Cold Resistance |
-40ºC x 100hr |
|
No Change |
| Humidity Resistance |
40ºCx90%x100hr |
|
No Change |
| Thermal Cycle |
-40ºC
<=> 80ºC
(10 cycles) |
|
No Change |
| Sunshine Weather Meter |
100 hr |
|
No Change |
| Pencil Hardness |
|
|
6H ~ 8H |
| Shed Water (Touch Angle) |
|
|
114° |
|
|
Clarex®
HSOT Light Guide Panel: |
|
|
CHEMICAL
RESISTANCE:
|
| REAGENT |
CHANGE
IN APPEARANCE |
| Isopropyl
Alcohol |
No Change |
| Soap Aqua
Solution |
No Change |
| Water |
No Change |
| Sulfuric Acid |
Dissolved |
| Sodium
Carbonate |
Dissolved |
* Value
provided cannot be guaranteed in your application due to
circumstances beyond our control.
|
|
For more
information concerning any of our products,
call us at (516) 546-4315 or fax to (516) 868-2371.
You may also email us or write
to:
ASTRA PRODUCTS, INC
· P.O. BOX 479 · BALDWIN, NY 11510 USA
|
|
